Products | Your position:Home > Products |
![]() |
Product Name: | W series high temperature blower | ||
Appearance: | ![]() |
||
|
|
W series high temperature blower is applied in the transmission of less corrosive high-temperature gases at 250℃~750℃. It is extensively used in discharging system of various heating furnaces. It includes W4-57 series, W4-68 series, W4-70 series, W4-72 series, W4-73 series, W5-47 series, W5-55 series, W6-31 series, W6-40 series, W7-29 series, W8-35 series, W9-19 series, W9-26 series and other high-temperature fans.
Applications
NO. |
Fan models |
Medium |
Temperature (℃) |
Dustiness (g/Nm3) |
Rotating speed (r/min) |
Flow rate (m3/h) |
Total pressure (Pa) |
Motor power (kW) |
1 |
W4-73No18D |
High temperature flue gas |
600~700 |
0.5 |
730 |
133000 |
866 |
8-75 |
2 |
W6-2X31No19F |
Dusty gas |
400 |
0.8 |
1450 |
140000 |
6000 |
4-355 |
3 |
W6-2X40No30F |
Dusty gas |
450 |
≤80 |
980 |
900000 |
7500 |
6-2800 |
≡ Technical Articles |
≡ Related Products |
|
AB-S1 series axial fan with adjustable static blade AB-S1 series Meridionally accelerated axial fans mainly applied in flue gas desulfurization pressurization system in metallurgy industry, flue gas transmission system in sea-water desulfurization system, air supply and induced system in large-scale of coal-fired boiler in thermal power plant and ... |
|
|
AJ series primary dry dedustring axial fan of converter AJ series primary dry dedustring axial fan of converter is mainly applied in 80~250 tons of converter gas dry method dedusting system in steel industry. It adjusts the fan performance through variable frequency+change of impeller blade angle. This fan belongs ... |
|
|
SJ series sintering fan SJ series sintering fan is mainly applied in 75m2~450m2 of sintering system, the transmission gas is sintering flue gas, the maximum flow is 23000m3/min, maximum pressure is 20kPa and maximum power is 14500kW. Characteristics: high efficiency, low noise, |
|